|
Post by lobb on May 13, 2021 12:14:22 GMT -5
I added an addball to a breed file on PW. When I open the same file on LNZ, I can't find the data for that ball. The one time it's referenced is in "colour info override" (presumably because I painted it red just to see it easily) but nowhere else! Surely, the data about where it is, which ball it's attached to, etc. should be in there?
|
|
|
Post by CatCreature on May 13, 2021 21:21:33 GMT -5
It's not under the addballs section near the top? If it's the last ball you added, it should be at the bottom of that list!
|
|
|
Post by lobb on May 14, 2021 3:26:57 GMT -5
It's not under the addballs section near the top? If it's the last ball you added, it should be at the bottom of that list! Nope, it's not there! I know the addball number from LNZ and even copied everything to Word to see if I could locate it and nope, no matches other than the colour one.
I've noticed a similar issue in another file, where addballs don't show up in any sections but the lines connecting them do. O.o
|
|
|
Post by sindran on May 14, 2021 13:18:02 GMT -5
Idk if this will work, but you can try the online version of LNZ. There's a visual and you can select the option to turn off or on addballz, etc. You can then select the one you're looking for and it will highlight the code on the right hand side. mnemoli.github.io/LnzLive/export/index.htmlIf that link doesn't work go here github.com/mnemoli/LnzLiveand select the link on the right hand side under "About Edit Petz LNZ in your browser!"
|
|
|
Post by lobb on May 14, 2021 14:16:43 GMT -5
Idk if this will work, but you can try the online version of LNZ. There's a visual and you can select the option to turn off or on addballz, etc. You can then select the one you're looking for and it will highlight the code on the right hand side. mnemoli.github.io/LnzLive/export/index.htmlIf that link doesn't work go here github.com/mnemoli/LnzLiveand select the link on the right hand side under "About Edit Petz LNZ in your browser!" Thanks! Unfortunately, I can't get it to work. It won't paste the text I copied on LNZ... or when it seems to, the text just won't display. I don't know why!
|
|
|
Post by sindran on May 14, 2021 17:00:35 GMT -5
Idk if this will work, but you can try the online version of LNZ. There's a visual and you can select the option to turn off or on addballz, etc. You can then select the one you're looking for and it will highlight the code on the right hand side. mnemoli.github.io/LnzLive/export/index.htmlIf that link doesn't work go here github.com/mnemoli/LnzLiveand select the link on the right hand side under "About Edit Petz LNZ in your browser!" Thanks! Unfortunately, I can't get it to work. It won't paste the text I copied on LNZ... or when it seems to, the text just won't display. I don't know why! I know for me I have to manually do copy paste instead of control P. Also you might want start off by selecting one of the models to the left, then putting the code in. I hope you can get it to work! Also if you're not a part of the Petzcord yet, here's a link invite discord.gg/A8rXJNeR
|
|
|
Post by lobb on May 14, 2021 17:08:39 GMT -5
Thanks! Unfortunately, I can't get it to work. It won't paste the text I copied on LNZ... or when it seems to, the text just won't display. I don't know why! I know for me I have to manually do copy paste instead of control P. Also you might want start off by selecting one of the models to the left, then putting the code in. I hope you can get it to work! Also if you're not a part of the Petzcord yet, here's a link invite discord.gg/A8rXJNeRYeah, I tried both of those things but nothing worked. :/ Thanks for the Petzcord link, I don't use Discord much but I'll check it out next time I log in!
|
|